Miele F12011 S-1 Manual download pdf (Page 37)

Electrical connection U.K.

All electrical work should be carried out

by a suitably qualified and competent

person in strict accordance with current

local and national safety regulations

(BS 7671 in the UK).

The appliance is supplied with a mains

cable and moulded plug ready for

connection to an a.c. single phase

220-240 V 50 Hz supply.

Please ensure that the connection data

quoted on the data plate match the

household mains supply.

Connection should be made via a

suitable switched socket which is easily

accessible. For extra safety it is

advisable to protect the appliance with

a suitable residual current device

(RCD).

Do not connect the appliance to the

mains electricity supply by an extension

lead. Extension leads do not guarantee

the required safety of the appliance

(e.g. danger of overheating).

This appliance must not be connected

to the inverter of an autonomous power

supply, e.g. a solar power system.

When switching the appliance on, a

surge in power could trigger the safety

cut-out mechanism. This could damage

the electronic unit.

The appliance must not be used with

so-called energy saving devices. These

reduce the energy supply to the

appliance which could then become

too warm. Using such devices could

alter the specification of the product.

Non-rewireable plugs (BS 1363)

The fuse cover must be re-fitted when

changing the fuse, and if the fuse cover

is lost, the plug must not be used until a

suitable replacement is obtained. The

colour of the correct replacement cover

is that of the coloured insert in the base

of the plug, or the colour that is

embossed in words in the base of the

plug (as applicable to the design of the

plug fitted).

Replacement fuses should be ASTA

approved to BS 1362 and have the

correct rating. Replacement fuses and

fuse covers may be purchased from

your local electrical supplier.

WARNING

THIS APPLIANCE MUST BE

EARTHED

Electrical connection

37

1 ... 36 37 38 39 40 41 42 43 44

Comments to this Manuals

No comments