Miele F12011 S-1 Manual download pdf (Page 43)

a Top box

b Appliance

c Housing unit

d Wall

The appliance can be installed in a

kitchen run. To match the height of the

rest of the kitchen, the appliance can

be fitted with a suitable top box a.

–

A ventilation gap of at least 50 mm

depth must be allowed for behind the

appliance for air to circulate.

–

The ventilation cross-section below

the ceiling must be at least 300 cm

2

to ensure that air can circulate

without hindrance.

The compressor will operate more

economically, the larger the ventilation

cross-section. Otherwise the appliance

has to work longer and harder, resulting

in an increase in electricity

consumption and also an increase in

the operating temperature of the

compressor, which can result in

damage to the compressor.

The ventilation gaps must not be

covered or blocked in any way.

They should be dusted on a regular

basis.

When built into a kitchen run (max.

depth 580 mm) the appliance can be

installed directly next to a kitchen

furniture housing unit. The appliance

door will protrude in front of furniture

fronts at the sides by 34 mm and by

50 mm in the middle of the door. This

enables the doors to be opened and

shut without being obstructed.

When installed next to a wall d a

distance of approx. 50 mm must be

maintained on the hinge side between

the wall d and the appliance b,so

that the door and the handle have

sufficient space for opening.

Building in the appliance

43

1 ... 42 43 44

Comments to this Manuals

No comments