Miele PW 5065 Service Manual download pdf (Page 30)

2 Function

2.1 Water path control unit and motor, M24

Driven via 230 V motor. Water path control unit position established via slip

contacts and time measurement.

2.2 Water intake monitoring

Water Control System (WCS):

With water intake monitoring, a closed on-site tap, water pressure that is too low

or a major leak, e.g. due to a missing fluff filter, can be detected.

During water intake the pressure increase is monitored to ensure that a pressure

increase of 8 mm wc occurs within 75 s. If this is not registered, the programme is

cancelled and a Water intake fault is indicated.

Hot water/Alternative water only: With the programmable water intake option

Hot water/Alternative water activated, the fault is registered but the programme

is continued with cold water intake only.

2.3 Water overflow monitoring

If a water level of 220 mm wc is reached, the drain pump/valve is activated until

the level drops to 180 mm wc.

2.4 Alternative water

PW 6055, PW 6065

The alternative water intake is via the main wash compartment.

For retrofitting of alternative water supply valve, see Alternative water valve fitting,

040 4.1.

Descriptive Technical Documentation

040-2 DTD no. 511-6055

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 95 96

No comments

Miele PW 5065 Service Manual Page 30