Miele W 1119 Technical Information download pdf (Page 73)

Technical Information

W1113, W1119, W1203, W1213 & W1215 Clothes Washers

4.3 Service Mode

Initial Requirements

1. Finish or cancel any program in operation.

2. Switch off the appliance.

3. Close the door.

Note

Once you begin the access procedure, it must be completed within

10 seconds.

Accessing

1. Press and hold the Start Button while switching the appliance

on with the On/Off Button.

2. Release the Start Button 2 seconds after switching the

appliance on.

3. Immediately press and release the Start Button 2 times.

4. Press and hold down the Start Button a 3rd time, until the Start

LED flashes.

Acknowledgement indicator

Slow flashing Start LED.

Note

Upon entering the Service Mode, The Buzzer LED displays a

flashing rhythm of 2 flashes while the ROM ID is shown in the

display.

Press the Buzzer Button to advance to the FAULT REGISTER

level.

Refer to the Service Mode Tables 070-0 through 070-11.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 87 88

No comments

Miele W 1119 Technical Information Page 73