Miele W 3724 Platinum Operations Instructions download pdf (Page 59)

Top-up rinse for Cottons

When this is activated, additional

water flows into the drum at the end

of the main wash to cool the suds

down. Hot suds can damage plastic

drainage pipes.

Top-up rinse takes place when a

temperature of 95°C is selected.

Top-up rinse should be activated:

–

to prevent the danger of scalding if

the drain hose is hooked over the

edge of a sink or basin.

– where the drainage pipes do not

comply with DIN 1986.

The washing machine is delivered with

the Top-up rinse for Cottons

deactivated.

Follow steps A to G to programme

and store in memory.

Before you begin, first ensure that:

–

The washing machine is switched off.

–

The machine is properly closed.

–

The programme selector is at Finish.

A Press the Start button and keep it

pressed in whilst carrying out steps

B-C.

B Switch the machine on with the

I-On/0-Off button.

C Wait until the Start button indicator

light comes on . . .

D . . . and then release the Start

button.

E Turn the programme selector to the

Cottons 30°C position:

A P will flash in the display alternating

with the number 0 or 1.

0 = Top-up rinse is deactivated.

1 = Top-up rinse is activated.

F Press the Start button to change the

display from 0 to 1 or from 1 to 0.

G Switch the machine off with the

I-On/0-Off button.

The setting you have selected is now

stored in memory and will remain so

until you alter it.

Programmable functions

59

1 2 ... 54 55 56 57 58 59 60 61 62 63 64

Comments to this Manuals

No comments