Miele KWT1601VI User Manual download pdf (Page 38)

Installation with partition using the

"Merging Kit"

The minimum thickness of the partition

is

5

/

8

" (16 mm).

If there is a partition with a thickness

from

5

/

8

" (16 mm) to 6

5

/

16

" (160 mm)

between the adjacent appliances, then

each appliance should be individually

installed within its own niche using the

mounting accessories included.

The "Merging Kit" will also be needed.

The "Merging Kit" is available from

Miele.

Installation with partition without

using the "Merging Kit"

If there is a partition with a thickness of

more than 6

5

/

16

" (160 mm) between

the adjacent appliances, then each

appliance should be individually

installed within its own niche using the

mounting accessories included (the

"Merging Kit" is not necessary).

Side panels

If one side of the appliance is visible, a

side panel must be used.

The side panel must be firmly secured

to the wall, the floor and the overhead

furniture/fixtures before the appliance is

placed in the cavity.

The dimensions of the side panel are

taken from the opposite wall of the

installation space. During installation,

ensure that the cavity is square and the

measurements are correct.

Adjusting the door opening

angle (optional accessory)

Depending on the installation site, it

may be necessary to adjust the door

opening angle to 90°.

^ Open the door.

^

Insert the banking pin through the

holes and drive in with a hammer.

Installation

38

1 ... 37 38 39 ... 64

Comments to this Manuals

No comments