Miele KWT 6312 UGS Installation Manual download pdf (Page 54)

The appliance must be connected to an

electrical outlet that is properly

grounded. The electrical installation

must comply with the applicable

electrical code.

The plug must be easily accessible and

not concealed behind the appliance so

that the appliance can quickly be

disconnected from the electricity

supply in an emergency. In addition, no

other appliances should be plugged

into a socket located directly behind

this appliance.

The power cord must not come into

contact with the back of the appliance,

as they could be damaged by

vibrations from the appliance. This may

result in a short circuit.

Do not use an extension cord to

connect the appliance to the power

supply. Extension cords do not

guarantee the required safety of the

appliance (e.g. they pose a danger of

overheating).

Do not connect the appliance to

stand-alone inverters, such as those

used with an autonomous energy

source, e.g. solar power systems.

Otherwise, when the appliance is

switched on, peak loads in the system

can cause the safety shutdown

mechanism to be triggered. This can

damage electronic units.

In addition, the appliance must not be

used with energy-saving devices,

which reduce the amount of energy

supplied to the appliance and cause it

to overheat.

If the power cord needs to be replaced,

this work must only be performed by a

qualified electrician.

Electrical connection

54

1 ... 53 54 55 ... 76

Comments to this Manuals

No comments