Miele CVA 2652 Operations Instructions download pdf (Page 39)

Water tank

Empty the water tank daily, and fill it

with cold fresh water shortly before you

start preparing a beverage.

When cleaning, check to be sure

that there is no debris in or around

the valve. This would prevent the

tank from connecting properly,

causing it to leak.

^

Clean the niche of the water tank.

Waste container

Clean the waste container daily.

Typically there will also be some water

in the container, left over from the

brewing and rinsing processes.

^ Slightly lift the waste container, then

pull it out of the appliance.

^ Wash the container in the

dishwasher, or by hand with a mild

solution of warm water and liquid

dish soap, then dry thoroughly.

^

Clean the waster container niche. Be

sure to clean the sensors, left and

right, the sensors read if the waste

container is inserted and if it needs to

be emptied.

Drip tray with grid

Do not remove the drip tray from the

appliance for a few minutes after the

final rinse, as water will still run from

the lines.

Use caution when removing the drip

tray, the water may be hot. Danger

of burns.

Clean the drip tray daily.

^

Open the appliance door and

carefully remove the drip tray from

the appliance.

^ Wash the drip tray and the grid in the

dishwasher, or by hand with a mild

solution of warm water and liquid

dish soap, then dry thoroughly.

^ Clean and dry the metal sensors at

the back of the drip tray. If the

sensors are soiled or wet the unit

cannot read when the drip tray is full

and needs to be emptied.

^

Push the drip tray, with the grid

inserted, along the right hand side of

the opening and to the back of the

machine.

^

Close the door.

Cleaning and care

39

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 71 72

Comments to this Manuals

No comments