Miele DA 279-4 Operations Instructions download pdf (Page 29)

All electrical work should be

performed by a qualified electrician

in strict accordance with national

and local safety regulations.

Installation, repairs and other work

by unqualified persons could be

dangerous. The manufacturer can

not be held responsible for

unauthorized work.

Ensure that power to the appliance

is OFF while installation or repair

work is performed.

^

Verify that the voltage, load and

circuit rating information found on the

data plate (located behind the

grease filters), match the household

electrical supply before installing the

hood.

^ Use only with hood cord-connection

kits that have been investigated and

found acceptable for use with this

model hood.

If there is any question concerning the

electrical connection of this appliance

to your power supply, please consult a

licensed electrician or call Miele’s

Technical Service Department.

U 1-800-999-1360

V 1-800-565-6435

WARNING:

THIS APPLIANCE MUST BE

GROUNDED

Grounding Instructions

This appliance must be grounded. In

the event of an electrical short circuit,

grounding reduces the risk of electric

shock by providing a path of least

resistance. This appliance is equipped

with a cord having a grounding wire

with a grounding plug. The plug must

be plugged into an outlet that is

properly installed and grounded.

WARNING - Improper grounding can

result in a risk of electric shock.

If there is any doubt, have the electrical

system of the house checked by a

qualified electrician. The manufacturer

cannot be held responsible for

damages caused by the lack, or

inadequacy, of an effective grounding

system.

Do not use an extension cord. If the

power supply cord is too short, have a

qualified electrician install an outlet

near the appliance.

Important

The hood comes equipped witha4ft

(1.2 m) power cord with a NEMA 1-15

molded plug for connection to a

120 VAC, 60 Hz, 15 A power outlet.

Maximum load ..............420W

Overhead lighting ..........3x20W

Indirect lighting ...............10W

Voltage .....................120V

Frequency ..................60Hz

Circuit rating..................15A

Electrical data

29

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments