Miele W 211 Operations Instructions download pdf (Page 32)

Retaining plates

The ventilation system will be mounted

to the wall through the use of retaining

plates. Plate A is installed first,

followed by plate B. Plate C should only

be used if the distance between plate A

and plate B is greater than 14

(365 mm).

Attaching the retaining plates

to the wall

^ Before fitting the retaining plate draw

a vertical line centrally above the

cooktop on the rear wall.

Mark measurement S from the

cooktop surface upwards (see

"Appliance dimensions"). This marks

the height of the lower rim of the

hood.

Installation

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 43 44

No comments

Miele W 211 Operations Instructions Page 32