Miele 09 276 830 Operations Instructions download pdf (Page 18)

Before using the appliance for

the first time, you require:

–

approx. 2 litres of water,

–

approx. 2 kg dishwasher salt*,

–

domestic dishwasher detergent*,

–

rinse aid* formulated for domestic

dishwashers.

* See "Optional accessories".

Every dishwasher is tested at the

factory.

There will be residual water in the

appliance from this test. It is not an

indication that it has been used

previously.

Filling the salt reservoir

If the water in your area is very soft

and constantly lower than

0.7 mmol/l (4 °d) you do not need to

add dishwasher salt. The water

softener must, however, still be

programmed to correspond to the

water hardness level in your area.

Important: Before filling the salt

reservoir with dishwasher salt for the

first time, you must fill it with

approx. 2 litres of water to enable

the salt to dissolve. Once the

dishwasher has been used, there is

always sufficient water in the

reservoir.

,

Inadvertently filling the salt

reservoir with powder or liquid

dishwasher detergent will damage

the water softener. Make sure you

have picked up the correct packet

of dishwasher salt before filling the

salt reservoir!

,

Please only use special coarse

grained dishwasher salt for

reactivation, as other salts may

contain insoluble additives which

can impair the functioning of the

softener.

Before using for the first time

18

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 71 72

Comments to this Manuals

No comments