Miele 09 276 830 Operations Instructions download pdf (Page 19)

^

Remove the lower basket and

unscrew the salt reservoir cap.

Water or saline solution will run out

of the reservoir when the cap is

removed. It should therefore only be

removed in order to refill the salt

reservoir.

^

Fill the reservoir with approx. 2 litres

of water (first use only).

^

Place the funnel provided over the

salt reservoir and carefully fill with

salt until the reservoir is full. The salt

reservoir holds approx. 2 kg of salt

depending on the brand used.

As the salt reservoir is filled,

displaced water will overflow.

^

Clean any excess salt from around

the reservoir opening and then screw

the cap on again firmly.

^

Run the Quick wash programme im

-

mediately without any crockery in the

dishwasher to remove any traces of

salt from the cabinet (do not use the

Turbo function if your dishwasher has

this feature).

Salt indicator

^

Fill the salt reservoir with dishwasher

salt when the salt indicator light

comes on. (If it comes on during a

programme, wait until the end of the

programme).

After the reservoir has been filled, the

water softener is automatically

reactivated the next time the

dishwasher is run. The salt refill

indicator may still be illuminated during

this process. It will go out once the salt

concentration has reached the correct

level.

The salt refill indicator will not come on

if the dishwasher has been

programmed for a water hardness level

of less than 0.7 mmol/l (4 °d German

scale).

,

After filling the the salt reservoir,

run the Quick wash programme im-

mediately without any crockery in

the dishwasher to remove any traces

of salt from the cabinet (do not use

the Turbo function if your

dishwasher has this feature).

Before using for the first time

19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 71 72

Comments to this Manuals

No comments