Miele G 1173 SCVi Operations Instructions download pdf (Page 18)

^

Remove the lower basket and

unscrew the salt reservoir cap.

Water or saline solution will run out

of the reservoir when the cap is

removed. It should therefore only be

removed in order to refill the salt

reservoir.

^

Fill the reservoir with approx. 2 litres

of water (first use only).

^

Place the funnel provided over the

salt reservoir and carefully fill with

salt until the reservoir is full. The salt

reservoir holds approx. 2 kg of salt.

^

Clean any excess salt from around

the reservoir opening and then screw

the cap on again firmly.

^

Run the Quick wash programme im

-

mediately (without any crockery in

the dishwasher) to remove any traces

of salt from the cabinet.

Salt refill indicator F

^

Fill the salt reservoir with dishwasher

salt when the salt indicator light F

comes on. (If it comes on during a

programme, wait until the end of the

programme).

After the reservoir has been filled, the

water softener is automatically

reactivated the next time the

dishwasher is run. The salt indicator

light may still be illuminated during this

process. It will go out once the salt

concentration has reached the correct

level.

The salt indicator is deactivated when

the dishwasher has been programmed

to a water hardness level below

0.7 mmol/l (4 °d).

,

After filling the salt reservoir, run

the Quick wash programme immedi-

ately (without any crockery in the

dishwasher) to remove any traces of

salt from the cabinet.

Before using for the first time

18

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 67 68

Comments to this Manuals

No comments