Miele G 1173 SCVi Operations Instructions download pdf (Page 63)

The Miele waterproof anti-leak

system

Providing your dishwasher has been

installed correctly, the Miele waterproof

anti-leak system will protect you from

water damage throughout its lifetime.

Connection to the water supply

,

Water in the dishwasher must

not be used as drinking water.

–

The dishwasher may be connected

to a cold or hot water supply, max.

60 °C. We would only recommend

connection to a hot water supply if it

is economical, e.g. a solar powered

supply. When connected to a hot

water supply all programme stages

which would otherwise be carried out

with cold water will be carried out

with hot water.

,

A hot water connection with

temperatures exceeding 60 °C may

cause damage to the unit, impair

wash results and affect the product

guarantee.

–

The inlet hose is approx. 1.5 m long. A

1.5 metre long flexible metal extension

hose, pressure tested to 14,000 kPa/

140 bar, is available as an optional

accessory if required.

–

A tap with a

3

/

4

" male thread must be

provided on site.

–

The dishwasher is constructed to

comply with Australian regulations,

and may be connected to a suitable

supply without an extra non-return

valve if national regulations allow this.

–

The water pressure (flow pressure at

the take-off point) must be between

30 and 1000 kPa (0.3 and 10 bar).

If the water pressure is too high, a

pressure reducer valve must be

fitted.

,

To avoid any damage to the

appliance, the dishwasher must only

be connected to a fully vented

plumbing system.

! The inlet hose must not be

shortened or damaged in any way

as it contains electrical components

(see illustration).

This appliance incorporates back

-

flow protection complying with

AS/NZS 3500.1.2. No further

backflow protection required for

connection to the water supply.

Plumbing

63

1 2 ... 58 59 60 61 62 63 64 65 66 67 68

Comments to this Manuals

No comments