Miele G 685 Operations Instructions download pdf (Page 47)

Problem solving guide

With the aid of the following explana-

tory notes, minor faults can be cor-

rected without contacting the Miele Ser-

vice Department.

Any work on the electrical compo-

nents of the appliance should only

be carried out by a suitably quali-

fied and competent person in ac-

cordance with local and national

regulations. Unauthorised repairs

could be dangerous.

If, however, you are unable to correct

the problem, the Miele Service Depart-

ment should be contacted.

Faults/possible causes

The dishwasher does not start

– The door is not properly closed.

– The plug is not properly inserted.

– The fuse is defective/has blown.

The dishes are not cleaned

– The dishes are incorrectly loaded.

– The correct amount of detergent was

not dosed - see “Programme chart”.

– The filters in the wash cabinet are

not clean - see “Cleaning and care”.

– The spray arm jets are blocked - see

“Cleaning and care”.

– The wrong programme was selected

- see "Programme chart".

White residue on cutlery and

crockery

– No salt in the salt reservoir.

Fill the salt reservoir with dish-

washer salt for reactivation

- see section on "Water softener".

– Salt reservoir lid has not been

screwed on properly.

– Not enough rinse aid.

Use a higher dosage setting

- see "Adding rinse aid".

Problem solving guide

47

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 87 88

Comments to this Manuals

No comments