Miele G 685 Operations Instructions download pdf (Page 73)

5.Fitting the (matching) door

front

The door of a kitchen base unit (without

the drawer facia or fittings) is normally

used for the door front.

The door front is fixed to the machine

door outer panel using a fixing bracket

which has to be pre-mounted on the

rear of the door front.

Fixing brackets are already fitted on to

the stainless steel door front. This front

cannot be shortened.

Door fronts differ in weight and it is

therefore essential that the door

springs are adjusted (see Step 6)

after the door front has been fitted.

Calculate dimension “X” and make a

note of it before attaching the fixing

bracket.

Dimension “X” is the dimension shown

on the illustration between the drill hole

in the outer door panel and the lower

edge of the neighbouring unit door(s).

Installing integrated “i” Dishwashers

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 87 88

No comments

Miele G 685 Operations Instructions Page 73