Miele G 685 Operations Instructions download pdf (Page 15)

Water softener

To set the water softener

Water hardness level of 20-630 mg/l

(1 - 35 °d German scale):

Switch the dishwasher off.

Use a screwdriver to remove the lid

of the water hardness level selector

in the wash cabinet.

Check that the selector is set to set-

ting 6 (factory setting). If not, use a

flat blade screwdriver or a coin to

turn the selector until it clicks on set-

ting 6.

Turn the programme selector switch

to the “STOP” position.

Press the“Delay start” and “START”

buttons

at the same time and at the

same time switch the dishwasher on

by pressing the “On/Off”-button.

A “P” and a figure appear in the time

display.

Set the programme selector switch

to the “UNIVERSAL 55 °” position.

A figure appears in the time display

corresponding to the water hardness

level already set, e.g. "22" - the water

softener is set to a water hardness

level of 400 mg/l (22 °d German

scale).

Press the “Top Solo” button as often

as necessary until the value of your

water hardness appears in °d in the

time display.

Example:

For a water hardness level of 540 mg/l

(30 °d German scale).

Keep pressing the “Top Solo” button

until “30” appears in the time display.

Once the figure “36” is reached the

counter returns to “0”.

Value “0” must not be set!

Press the “START”-button x 2.

The change is stored in memory;

the length of time of the selected pro-

gramme appears in the time display

again.

Water softener

15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 87 88

Comments to this Manuals

No comments