Miele KFN 8997 SE ed Operations Instructions download pdf (Page 32)

For the automatic ice cube maker to

operate it must be connected to the

mains water supply.

Switching on

^

Switch on the freezer section.

^

Open the top left drawer in the

freezer section.

^ Press the On/Off button on the ice

cube maker. The indicator light will

come on.

^ Close the drawer.

The drawer must be completely shut

for ice cubes to be produced.

After the appliance is switched on for

the first time it can take up to 24 hours

for the first ice cubes to drop out of the

ice cube maker and collect in the

drawer.

Thereafter, when the ice cube maker is

switched off and then on again it will

take up to a maximum of 6 hours for ice

cubes to be produced.

To ensure that the water pipes are

thoroughly flushed through before

use, ice cubes from the first three

ice cube making processes must not

be consumed.

This applies not only to when the

appliance is installed for the first

time but also if the appliance has

been out of use for a longer period

(e.g. whilst on holiday).

Making a large amount of ice cubes

The amount of ice cubes which the

appliance makes depends on the

temperature in the freezer section. The

lower the temperature, the more ice

cubes are produced within a certain

time frame.

Ice cube production is halted

automatically as soon as the ice cube

drawer is full.

If you require a large amount of ice

cubes,

^

replace the full ice cube drawer with

the drawer beside it on the right.

The ice cube maker will begin to

produce ice cubes again as soon as

this new drawer has been placed in

position and closed properly.

Ice cube maker

32

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 51 52

Comments to this Manuals

No comments