Miele KFN 8997 SE ed Operations Instructions download pdf (Page 43)

Notes on connecting to the

mains water supply

Connection to the mains water

supply should only be carried out by

a qualified and competent person in

accordance with national and local

regulations.

The water quality must conform to

the requirements for drinking water

in the country the appliance is being

installed in.

– All items used for connecting the

appliance to the mains water supply

must comply with the current national

and local safety regulations in the

country in which the appliance is

being installed.

– The appliance is only suitable for

connection to the cold water supply.

– The water pressure (flow rate) must

be between 1.5 and 6 bar.

–

The stainless steel hose is 1.5 m

long. This may only be lengthened

by means of a Miele extension hose.

This extension hose is available from

the Miele Spare Parts Department

and must only be fitted by a suitably

qualified fitter.

–

A stopcock must be provided

between the stainless steel hose and

the household water supply to

ensure that the water supply can be

cut off if necessary.

The stopcock should be easily

accessible after the appliance has

been built in.

Connection to the water inlet

Before making plumbing

connections, ensure the appliance is

disconnected from the mains

electricity supply.

Connection to the mains water supply

should incorporate a mains stopcock

with

3

/

4

" thread.

^

Connect the stainless steel hose to

the stopcock.

^

Ensure that it is screwed into position

correctly.

Before using the appliance for the first

time the water inlet pipe should be

purged of air by a qualified and

competent person.

–

To do so the stainless steel hose

should be filled as far as possible

with water before being connected to

the solenoid valve.

–

Mop up any spillages with a cloth.

Mains water connection

43

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 51 52

Comments to this Manuals

No comments