Miele CS 1011 G Installation Manual download pdf (Page 48)

Changing the jets

Disconnect the gas hob from the

mains electricity supply. Turn off the

gas supply.

To change the jets, the burner securing

screws must first be loosened and the

upper section of the appliance

removed.

To change the main jet

^

Remove burner covers op, burner

ring q and burner head r.

^

Pull the control knob off.

^

Loosen screws w.

^

Carefully remove the upper section of

the appliance. When doing this make

sure you do not also pull out the light

unit for the display a located

underneath the upper section. To

release the unit, squeeze together

the two clamps b.

^

Whilst counterholding it in place with

an SW 13 spanner, unscrew the main

jet anti-clockwise from its housing

using an SW 10 spanner (see

illustration).

^

Screw in the new main jet, once

again using the spanner to

counterhold the jet housing.

Conversion to another type of gas

48

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 54 55 56

Comments to this Manuals

No comments