Miele CS 1221 Operations Instructions download pdf (Page 36)

Make the worktop cut-out for one or

more appliances as applicable.

Remember to maintain a minimum

safety clearance from the back wall,

as well as from any tall unit or side

wall to the right or left of the

appliance(s).

See "Safety clearances".

Seal the cut surfaces with a suitable

heat-resistant sealant to avoid

swelling caused by moisture.

If, during installation, you find that the

seals on the corners of the frame are

not flush with the worktop surface,

the corner radius (ß R4) can be

carefully scribed to fit.

Preparing the worktop

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 47 48

No comments

Miele CS 1221 Operations Instructions Page 36