Miele CS 1221 Operations Instructions download pdf (Page 9)

Technical safety

~

Installation, maintenance and

repairs may only be carried out by a

suitably qualified and competent

person in strict accordance with current

national and local safety regulations.

Repairs and other work by unqualified

persons could be dangerous. The

manufacturer cannot be held liable for

unauthorised work.

~

Before installation, check the

appliance for visible signs of damage.

Under no circumstances should you

use it if it has been damaged. A

damaged appliance is dangerous.

~

Do not use the cooktop if it is faulty,

or if the ceramic surface is cracked,

chipped or damaged in any way.

Switch it off immediately, and

disconnect it from the mains electricity

supply. Danger of electric shock.

~

The electrical safety of this

appliance can only be guaranteed

when continuity is complete between it

and an effective earthing system which

complies with local and national safety

regulations. It is most important that this

basic safety requirement is present and

regularly tested, and where there is any

doubt, the household wiring system

should be inspected by a qualified

electrician. The manufacturer cannot be

held liable for the consequences of an

inadequate earthing system (e.g.

electric shock).

~

Before connecting the appliance,

make sure that the connection data on

the data plate (voltage and connected

load) match the mains electricity

supply.

This data must correspond in order to

avoid the risk of damage to the

appliance. Consult a qualified

electrician if in any doubt.

~

Do not connect the appliance to the

mains electricity supply by a

multi-socket unit or an extension lead.

These do not guarantee the required

safety of the appliance (e.g. danger of

overheating).

~

This appliance is not intended to be

operated by means of an external timer

or separate remote control-system.

~

For safety reasons, this appliance

may only be used after it has been built

in.

~

This appliance may be connected

via a fused plug and switched socket. If

you wish to connect it to an isolator

switch, or if the appliance is supplied

without a plug, it must be installed and

connected by a suitably qualified and

competent person in strict accordance

with current local and national safety

regulations. The manufacturer cannot

be held liable for damage caused by

incorrect installation or connection.

~

If the connection cable is damaged,

it must be replaced by a suitably

qualified electrician with a specialist

connection cable of type H 05 VV-F

(pvc insulated), available from Miele.

Warning and Safety instructions

9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 47 48

Comments to this Manuals

No comments