Miele H6461BP User Manual download pdf (Page 127)

,

The oven must not be operated

until it has been correctly installed in

its housing unit.

In order to function correctly, the

oven requires an adequate supply

of cool air.

Ensure that the supply of cool air is

not impaired:

– do not fit a back panel in the

housing unit.

– the unit shelf on which

the oven sits must not

touch the wall behind it.

– do not fit insulation

to the side walls of the -

housing unit.

Please also ensure that the cool air

supply is not unduly heated by other

heat sources such as a wood

burning stove.

Before installation

^

Before connecting the appliance to

the mains, you must disconnect the

power supply to the isolator switch.

Building in

^

Connect the mains cable from the

oven to the isolator.

Lifting the oven by the door handle

can damage the door. Use the

handle recesses on the side of the

casing.

It is advisable to dismantle the door

before installing the appliance (see

"Cleaning and Care - Dismantling the

door") and remove accessories from

the oven cavity. This will make it easier

to install in its niche and you will not be

tempted into using the handle to carry

it.

^ Push the oven into the housing unit

and align it.

^ Open the door (if you have not

removed it previously).

^

Use the screws supplied to secure

the oven to the side walls of the

housing unit through the holes in the

oven trim.

^

Refit the door, if necessary (see

"Cleaning and care - Refitting the

door").

Installing the oven

127

1 2 ... 122 123 124 125 126 127 128 129 130 131 132

Comments to this Manuals

No comments