Miele KM 548 User Manual download pdf (Page 23)

Calibrating the sensors

Automatic calibration

To ensure trouble free operation, the

sensors

–

recalibrate when the appliance is first

connected to the mains electricity

supply and after any interruption to

the power supply.

–

adjust themselves constantly whilst

the hob is in use.

If the sensors are over-sensitive or do

not react at all, or if the safety lock

indicator and cooking zone display

numbers light up when the hob is

switched off, the sensors will not

recalibrate themselves automatically.

If this is the case, recalibration will have

to be carried out manually.

Manual calibration

^

Make sure that there is no direct light

(from the sun or from an artificial

source) falling onto the hob. The area

surrounding the hob must not be too

dark, nor should the relationship

between light and shade be

constantly changing.

^

Make sure that there is nothing

covering the sensors or the hob.

Take any pans off the hob and wipe

away any food deposits.

^

Interrupt the power supply to the hob

for approx. 1 minute.

Reconnect the hob to the electricity

supply. The electronic unit will reset the

sensitivity levels of the sensors.

If this does not solve the problem,

please call the Miele Service

department.

Before using for the first time

23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 75 76

Comments to this Manuals

No comments