Miele KM 548 User Manual download pdf (Page 37)

Switching a cooking zone off

automatically

It is only possible to switch a cooking

zone off automatically if a power setting

has already been selected for that

zone.

Proceed as follows:

^

Select a power setting for the

relevant zone e.g. rear right, in the

usual way.

^

Touch the m sensor.

00 will appear in the timer display.

^ Touch the m sensor again.

An indicator lamp will appear in the

timer display.

^ If several cooking zones are being

used, touch the m sensor repeatedly

until the indicator lamp comes on

next to the cooking zone you wish to

use this function for, e.g. rear right.

Each time the m sensor is touched the

indicator lamps will appear one after

the other clockwise from front left to

front right, however only for those zones

which are switched on.

^

Touch - or + until the time you require

appears in the display, e.g.

15 minutes.

The time then counts down in minutes.

The time remaining can be seen in the

display and changed at any time by

touching - or +. The cooking zone

power setting can also be changed at

any time.

At the end of the time set, the cooking

zone will switch itself off automatically.

0 will appear in the cooking zone

display, and 00 in the time display. At

the same time, a buzzer will sound for a

few seconds. 00 will go out when the

buzzer stops. To turn the buzzer off

before this, touch the m sensor.

Timer

37

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 75 76

Comments to this Manuals

No comments