Miele KM 548 User Manual download pdf (Page 25)

Sensors

This hob is equipped with electronic

sensors which react to finger contact.

To operate a cooking zone, touch the

relevant sensor. Each time you touch a

sensor, an audible tone sounds.

Take care only to touch the middle

of the sensor required. Keep the

control panel clean, and do not

place anything on top of it. The

sensors may fail to react or they

could mistake the article or any dirt

for a fingertip contact, thereby

activating a function or even causing

the hob to switch off automatically

(see Safety switch-off.)

Never place hot pans on the sensor

switches. The electronic unit

underneath could get damaged.

Switching on

The hob must be switched on before

any of the zones can be used.

Do not leave the appliance

unattended whilst it is being used.

To switch the hob on:

^

Touch the ON/OFF sensor s.

0 appears in each of the cooking zone

displays. If no further entry is made, the

hob will switch itself off after a few

seconds for safety reasons.

To switch a cooking zone on:

^ Select a power setting between 1 and

9 by touching the - or + sensor.

To select cooking with Auto heat-up,

press the - sensor first (see "Auto

heat-up"). To select cooking without

Auto heat-up, press the + sensor first.

If you wish to switch on another

cooking zone, and the 0 for that zone

has already gone out, simply press the

- or + briefly. The 0 will reappear and

you can select a power setting (with or

without Auto heat-up).

Operation

25

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 75 76

Comments to this Manuals

No comments