Miele KM 5753 Operations Instructions download pdf (Page 24)

The cooktop is fitted with a timer which

can be used to time kitchen activities

and/or to switch off the burners

automatically.

You can set a time from 1 minute (01)to

9 ½ hours (9.^). If the time is more than

99 minutes (99), the setting will be

shown in half-hour increments, which

appear after the decimal point.

Use the - and + touch controls to raise

and lower the time. There are pre-set

stops at 2 hours and at 99 minutes. To

override a stop, briefly remove your

finger from the touch control, then

touch it again to continue.

To re-set the display to 00,

simultaneously touch - and +.

When the set time has elapsed, 00 will

appear in the timer display for a few

seconds. At the same time an audible

signal will sound for a few seconds. To

turn the signal off before this, touch the

m sensor.

Setting the timer

The timer can be used with the cooktop

turned on or off. It works like a manual

kitchen timer.

^

Touch the m, - or + sensor.

Two dashes appear in the display, and

the timer indicator will flash.

^

While the indicator is flashing, touch

the - or + sensor until the desired

time appears in the display,

e.g. 15 minutes.

The time then counts down in minutes.

The time remaining can be seen in the

display and changed at any time by

touching - or +.

Timer

24

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 51 52

Comments to this Manuals

No comments