Miele KM 5753 Operations Instructions download pdf (Page 25)

Automatic switch-off

To use this feature, a power setting

must be selected for the desired

burner. All burners can be programmed

at the same time.

If the programmed time is greater

than the maximum operating hours

permitted, the cooktop will

eventually switch-off automatically.

See "Safety cut-out feature" for more

information".

^

Turn the desired burner on, e.g. rear

right, and select a power level.

^ Touch the m sensor.

Two dashes appear in the display, and

the timer indicator will flash.

^ Touch the m sensor again.

The indicator for the timer in the display

goes out, and the automatic switch-off

indicator flashes.

^

If several burners are being used,

touch the m sensor repeatedly until

the indicator flashes next to the

burner you wish to use this function

for, e.g. back right.

The indicator for the burners being

used will light up clockwise, starting

with the front left.

^

Touch the - or + sensor until the

desired time appears in the display,

e.g. 15 minutes.

The time then counts down in minutes.

The time remaining can be seen in the

display and changed at any time by

touching - or +.

If you want to set another burner to

switch-off automatically, repeat the

same steps.

If more than one switch-off time is

programmed, the shortest time

remaining will show in the display, the

indicator for that particular burner will

flash. All the other indicators will remain

lit. If you want to check the remaining

time for another zone, touch the m

sensor until the indicator for the desired

burner flashes.

Timer

25

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 51 52

Comments to this Manuals

No comments