Miele DGC 5061 Operations Instructions download pdf (Page 23)

Setting the correct boiling point for water

The boiling point for water at a high altitude above sea level

will be lower than the boiling point for water at sea level. To

adjust the boiling point for the altitude in your area, fill the

water container with mains tap water (See "Operation -

Preparing the appliance for use"), and then run the Cook

universal programme ! (100 °C) for 15 minutes. Proceed as

described in "Operation".

This procedure sets the correct boiling point for water for the

altitude in your area and also flushes out the waterways.

Warning! A lot of steam will be emitted from the appliance.

If you move house, the appliance will need to be re-set for

the new altitude if this differs from the old one by more than

300 m. To do this, descale the appliance (see "Cleaning and

care - Maintenance - Descaling").

Heating up the appliance

To remove grease from the ring heating element, heat the

steam combi oven up with nothing in it at 200 °C using the

Fan plus programme for 30 minutes. Proceed as described in

"Operation".

There will be a slight smell the first time the heating element is

heated up.

The smell and any vapours will dissipate after a short time,

and do not indicate a faulty connection or appliance. It is

important to ensure that the room is well ventilated during this

operation.

Before using for the first time

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 75 76

No comments

Miele DGC 5061 Operations Instructions Page 23