Miele PW 5065 Service Manual download pdf (Page 23)

Proofing 30°C to 40°C Max. load 3.0 kg

Use for Treating microfibre fabrics, ski wear, fine closeweave cotton

garments (poplin) or tablecloths with a water and dirt resistant

finish.

Note – The items should be colour sorted and freshly laundered and

spun or dried before proofing.

– For best results, they should be heat-treated afterwards,

either in a tumble dryer or by ironing.

Proofing

agents

– Only use proofing agents containing fluorochemical

compounds which are stated by the manufacturer as being

"suitable for use on membrane textiles". Do not use proofing

agents which contain paraffin.

– Add proofing agents to the fabric conditioner compartment §.

Separate rinse Max. load 6.5 kg

Use for Articles which have been washed by hand and only need to be

rinsed and spun in the machine.

Intensive wash* 40°C to 95°C Max. load 6.5 kg

Use for Heavily soiled cotton, linen and mixed fibre fabrics.

Additional

option

Pre-wash

Detergent Universal detergent or detergent for coloured fabrics

Note for test institutes: Standard programme in accordance with EN 60456

*To carry out a wash on the standard programme in accordance with EN 60456,

the Intensive wash programme must be selected. The Cold option must be

selected for the Main wash water and Rinse water settings.

Programme chart

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

No comments

Miele PW 5065 Service Manual Page 23