Miele W 820 Operations Instructions download pdf (Page 33)

Installation

Levelling the machine

The machine must stand level to en-

sure smooth operation. Check with a

spirit level.

The feet are levelled using the leg level-

lers as follows:

Unscrew foot or feet until the ma-

chine stands level.

Hold the foot tight using a pipe

wrench.

Tighten the counternut using a

screwdriver as indicated.

Building under

It is possible to install this appliance

under a continuous worktop/in a kit-

chen run:

A special building under kit * is re-

quired.

The machine lid must be replaced

by a cover plate.

This must be fitted by a suitably com-

petent person exactly according to

the fitting instructions included with

the kit to ensure electrical safety.

For installation under a work surface

900/910mm from the floor, a spacer

kit * is required.

Connections for electricity, water and

drainage should be installed in such

a way that they remain accessible

when the machine is in place.

Fitting instructions are included with

the kit.

All parts marked * are available from

the Miele Spare Parts or Sales Depart-

ment.

33

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments