Miele HG02 User Manual download pdf (Page 23)

Attach the panel to the dishwasher

by aligning the bracket tabs with the

slots on the door.

Open the dishwasher door slightly. If

the locking screws on the edge of the

dishwasher door can not be reached,

the dishwasher will have to be pulled

out of its opening a few inches.

Push up one side of the door panel

until it touches the filler strips (or con

trol panel if filler strips are not used)

and lightly tighten the T20 Torx

screws on the corresponding edge of

the machine door. Do not use a

power screwdriver.

Repeat the process with the other

side of the door panel.

Shut the door.

Check that the door panel is adjusted

correctly. It should be snug at the top

and neatly aligned with the cabinet

doors and drawer lines. If it is not

aligned properly, loosen the Torx

screws and adjust the panel.

Once the door panel is positioned cor-

rectly:

^ Open the dishwasher door.

^ Tighten all the Torx screws on the

edges of the dishwasher door.

^ Use the provided caps to plug the

locking screw access holes.

Installation

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 39 40

No comments

Miele HG02 User Manual Page 23