Miele HG02 User Manual download pdf (Page 28)

10. Adjust the door springs

Open the dishwasher door halfway.

If the door remains in this position when

released, the springs are adjusted cor

rectly.

If the door drops, the tension on the

springs needs to be increased.

If it closes on its own, the tension on the

springs need to be decreased.

To adjust the door springs use a T20

Torx or a small slotted screwdriver

and turn the screw located behind

the door in the upper front strip, on

the left hand side of the dishwasher.

Do not use a power screwdriver.

– turn clockwise to increase the

tension

– turn counterclockwise to de-

crease the tension.

Note:

If the door springs can not be adjusted

enough (the door falls), the custom

door panel is too heavy.

Call your Miele dealer or Miele’s Techni

cal Service Department for advice on

stronger door spings.

Installation

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 39 40

No comments

Miele HG02 User Manual Page 28