Miele HG02 User Manual download pdf (Page 24)

If the adjacent cabinetry (or appli

ance) does not have drawers and

alignment to a drawer line is not

possible:

^ Hang the bracket on the machine

door, without the templates. Tighten

the four locking screws on the edges

of the door panel.

^ Close the door.

^ Measure the distance from the adja-

cent cabinet’s (or appliance) door

bottom to the bottom of the mounting

bracket (X).

Draw a line on the rear of the door

panel (X) inches up from the bottom.

Remove the bracket from the ma

chine door and place it on the rear of

the door panel so that:

– the bracket is centered left to

right,

– the bottom of the bracket is

aligned with the (X) line.

^ Tape the bracket to the door panel to

hold it in place while the mounting

holes are drilled.

Drill pilot holes for the screws using a

" (2.5 mm) bit.

Attach the bracket to the panel using

the 6 screws provided.

Installation

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 39 40

No comments

Miele HG02 User Manual Page 24