Miele CVA 4080 Technical Information download pdf (Page 130)

Technical Information

CVA4070 / CVA4075 Coffee Systems

Defective microswitch or no continuity in connectors.

• Check the connecting cables.

• Replace the connecting cables as necessary.

• Position control microswitch– Check

• Replace the microswitch if necessary.

Brew unit drive defective.

Note

W o the home

position, refer to Figure 6-1. Brew unit drive, home position.

hen installing the brew unit, make sure that the pawl is set t

• Install a new brew unit drive.

6.3.13

(2R1) does not heat.

• Flow-thru heater coffee/hot water – Check

• If necessary, Flow-thru heater coffee/hot water – Remove

6.3.14

Flow-thru heater steam does not heat.

• Install a new flow-thru heater steam.

ration of coffee

and hot water until service is performed, the customer can switch the

off.

F80 Cause

Flow-thru heater coffee/hot water

• Install a new flow-thru heater coffee/hot water.

Temperature fuse has tripped.

• Replace the temperature fuse.

F81

• Flow-thru heater steam – Check

• If necessary, Flow-thru heater steam – Remove

Te perature fuse has cut out.

Note

To be able to continue using the appliance for the prepa

steam system off, refer to Steam system – On/

130

1 ... 129 130 131

No comments

Miele CVA 4080 Technical Information Page 130