Miele 09 968 280 Service Manual download pdf (Page 10)

Exhaust duct

39

Condensate trap

In addition to insulating the exhaust

duct, we

recommend installing a

condensate trap to collect and

evaporate any condensate which might

accumulate.

Condensate traps are available for

exhaust ducts with a diameter of 5"

(125 mm) or 6" (150 mm).

 When installing a co

ndensate trap,

make sure that it is positioned

vertically and, if possible, directly

above the hood outlet duct collar.

The arrow on the housing indicates

the direction of airflow.

Reducing Collar

(optional accessory)

If you would like to reduce the

envir

onmental impact of your ventilation

system by limiting the CFM output the

Reducing Collar can be installed. It

reduces the air flow to less than

400 CFM. Check local building codes

for max. CFM requirements.

 Push the Reducing Collar on the

e

xhaust port of the fan.

 Push the exhaust hose over it.

 Fix both with a hose clamp.

1 ... 9 10 11 ... 19

Comments to this Manuals

No comments