Miele DA 406 Service Manual download pdf (Page 15)

Switching on the fan

^

Press the On/Off touch control.

The fan runs at power level "II".

The indicator lamp will come on.

If the cooker hood has been

connected to a window contact

switch via the Miele Control module

DSM 400 then the fan cannot be

switched on if the window is shut.

The indicator lamp will flash.

Selecting a power level

^ Use the "– / +" touch controls to

select the power level required.

"+" touch control = higher setting

"–" touch control = lower setting

Depending on the intensity of the

cooking vapours, levels "I" to "III" (green

indicator lamps) are usually sufficient

for normal cooking.

Intensive setting

When frying or cooking food with a

strong aroma, you may wish to select

the Intensive setting (yellow indicator

lamp) for a short period.

Automatic switch-off of the Intensive

setting

You can set the Intensive setting so that

it only runs for 10 minutes before

reverting automatically to level III.

^

To set this option both the fan and

the hob lighting must be switched off.

^

Press the run-on option touch control

for approx. 10 seconds. The first fan

setting indicator will light up.

^ Then press, one after the other,

- the hob lighting touch control

- the "–" touch control and

- the hob lighting touch control again.

Operation

15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Comments to this Manuals

No comments