Miele DA 5330 D Service Manual Page 18

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 17
,
Before any cleaning or
maintenance work is carried out,
disconnect the cooker hood from the
mains supply.
Ensure that:
– it is switched off at the isolator, or
– it is switched off at the wall socket
and the plug removed, or
– the fuse from the fused spur
connection unit is withdrawn, or
– the mains fuse is withdrawn, or
– the screw-out fuse is removed (in
countries where this is applicable).
Please note that this appliance has
two electrical connections, and both
have to be disconnected for
cleaning and maintenance work.
E-Cloth
^ A microfibre “E-Cloth” is available
from the Miele UK Spare Parts
Department or via the internet on
www.miele.co.uk which is suitable for
cleaning surfaces such as stainless
steel, glass, plastic and chrome
without the use of chemicals. It can
be washed 300 times.
Housing
General
The surfaces and controls are
susceptible to scratches and
abrasions. Please observe the
following cleaning instructions.
^
All external surfaces and controls can
be cleaned using an E-Cloth, or with
warm water and a little washing-up
liquid applied with a well wrung-out
soft sponge or cloth.
^
Wipe the surfaces dry using a soft
cloth.
Do not use too much water when
cleaning the controls. Water could
penetrate into the electronics and
cause damage.
Do not use:
cleaning agents containing soda,
acids, chlorides or solvents,
abrasive cleaning agents e.g.
powder cleaners or cream cleaners,
and abrasive sponges, e.g. pot
scourers or sponges which have
been previously used with abrasive
cleaning agents. These will damage
the surface material.
Important for appliances with
stainless steel housing
(This infomation does not apply to the
controls).
Stainless steel surfaces can be cleaned
using the Miele E-Cloth or with a
suitable, non-abrasive, proprietary
cleaning agent, following the
manufacturer's instructions on the
packaging.
To help prevent re-soiling, a proprietary
conditioning agent for stainless steel
(available from the Miele Spare Parts
Department or via the internet on
www.miele.co.uk) can also be used.
Cleaning and care
18
Page view 17
1 ... 17 18 19 ... 32

Comments to this Manuals

No comments