Miele DA270 User Manual

Operating and InstallationInstructionsVentilation SystemDA 270To prevent accidentsand machine damage,read these instructionsbeforeinstallation or use.

Turning on the fan^Press the On/Off button.The fan runs at power level “lI”.The indicator lights.Selecting the power level^ Use the _ controls to sele

Turning off the fan^Press the On/Off button to turn thefan off.The indicator goes out.Automatic Safety Shut OffThe fan will turn off automatically 10h

Turning the lighting on/offThe overhead lighting can be turnedon and off independently of the fan.^Press the light button briefly to turnon the light

Filter timersGrease filtersA timer monitors the hours of operation.The indicator for the grease filter willlight after 30 hours of fan operation. Theg

Reprogramming the greasefilter timerThe grease filter timer is preset to 30hours. This time can be lengthened orshortened to 20, 30, 40 or 50 hours.–A

Before cleaning or servicing thehood, disconnect it from the powersupply by either removing the fuse,unplugging it from the outlet ormanually "tr

Grease filtersThe reusable metal grease filtersremove solid particles from the ventedkitchen air (grease, dust, etc).The grease filters should be clea

Inserting the grease filtersWhen putting the grease filters backmake sure that the locking clips arevisible facing the cooking surface.If the filters

Changing the light bulbBefore changing the light bulbs,disconnect the hood from the powersupply by either removing the fuse,unplugging it, or manually

In the event of a fault which you cannotcorrect yourself please contact:–Your Miele Dealeror–The Miele Technical ServiceDepartmentUSA 1-800-999-1360te

ContentsIMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Functional description . . . . . . . . . . . .

20

Installation Instructions

ContentsCaring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Structural support . . . . . .

Disposal of packing materialThe cardboard box and packingmaterials protect the appliance duringshipping. They have been designed tobe biodegradable an

The ceiling mounting plate willsupport the weight of the hood. Thisceiling plate must be attached torigid structural framing that issupported in its e

All electrical work should beperformed by a qualified electricianin strict accordance with nationaland local safety regulations.Installation, repairs

a Mounting bolt holesb Cut out for power cordc Exhaust connection 6" (150 mm) diameterAppliance dimensions26

Do not install this exhaust hood overcooktops burning solid fuel.When installing the hood, adhere tothe following minimum distance (S)between the top

^Hold the mounting plate up to theceiling so that the orange arrow facesthe front of the hood and aligns withthe line drawn on the ceilling.Mark the p

^ Secure the ducting to the mountingplate using a hose clip.^ Insert the short edge of the twospring clips into their slots frombelow and pivot them 9

Read these Operating Instructions carefully before installing orusing the Ventilation System.This appliance is intended forresidential use only. Use t

^Screw the mounting plate through theceiling and into the structural framingusing 8 x 60 lag bolts and washers.Once tight, make sure that themounting

^Bolt the flange firmly to the ceilingusing the four M6 nuts.^Shorten the power cord as much aspossible and attach it to the terminalblock inside the

Danger of toxic fumes.Gas cooking appliances releasecarbon monoxide that can be harm-ful or fatal if inhaled. The exhaustgases extracted by the hoodsh

– If the exhaust is ducted into aninactive flue, the air must be expelledparallel to the flow direction of theflue.Never connect an exhaust hood toan

34

35

Alteration rights reserved / 0203This paper is bleached without the use of chlorine.00M.-Nr. 05 854 670 / V

This equipment is not designed formaritime use or for use in mobileinstallations such as caravans or air-craft. However, under certain conditionsit ma

, WARNING - TO REDUCETHE RISK OF A RANGE TOPGREASE FIRE:Never leave surface unitsunattended at high settings.Boilovers cause smoking and greasyspillov

Installation, WARNINGTo reduce the risk of fire, onlyuse metal ductwork.When installing the hood, follow therecommended minimum safetydistances betwee

The hood offers two modes ofoperation:Air extractionThe air is drawn in and cleaned by thegrease filters and directed outside.The hood comes equipped

Guide to the hood8

a Cover plateb Chimneyc Canopyd Indirect lightinge Overhead lightingf Grease filterg Indirect lighting On/Offswitchh Overhead lighting buttonThe butto