Miele DA 5391 W Operating and Service Manual

Installation InstructionsDA 5321 WDA 5381 WDA 5391 W en-CA Installation, repair and maintenance work should be performed

Installation30

a 3 protective shields to preventscratches to the chimney duringinstallation.b 1 vent collarfor use with 6" (150 mm) exhaustductingc 1 reducing c

Protective filmThe casing is covered with a protectivefilm to prevent scratching duringtransport.^Peel off the film before installing thecasing parts.

,WARNINGDanger of toxic fumes.Gas cooking appliances releasecarbon monoxide that can beharmful or fatal if inhaled.To reduce the risk of fire and topr

– If the exhaust is ducted into aninactive flue, the air must be expelledparallel to the flow direction of theflue.Never connect an exhaust hood toan

,WARNINGTO REDUCE THE RISK OFFIRE, ELECTRIC SHOCK, ORINJURY TO PERSONS,OBSERVE THE FOLLOWING:All electrical work should beperformed by a qualified ele

Maximum loadDA5381W/DA5391 W ...430WDA 5321 W ...450WOverhead lightingDA5381W/DA5391 W ...4x20WDA 5321 W...5x20WVolta

M.-Nr. 07 901 910 / 00Alteration rights reserved / 1910INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOSTCURRENT PRODUCT

READ AND SAVE THESEINSTRUCTIONSKeep these instructions in a safeplace and pass them on to any futureuser.Read these instructions carefullybefore insta

~d) Before connecting the applianceto the power supply make sure that thevoltage and frequency listed on thedata plate correspond with thehousehold el

,WARNINGTO REDUCE THE RISK OFINJURY TO PERSONS IN THEEVENT OF A COOKTOPGREASE FIRE, OBSERVE THEFOLLOWING*:~a) SMOTHER FLAMES with a closefitting lid,

Installation,WARNINGTO REDUCE THE RISK OFFIRE, ELECTRIC SHOCK, ORINJURY TO PERSONS,OBSERVE THE FOLLOWING:~a) Installation work and electricalwiring mu

1) Air extraction mode2) Recirculation mode3) Air extraction vent installed upwards4) and 5) Installation areaWall/ceiling area respectively for venth

Cut out area in wall or ceiling forentrance of 6" (150 mm)ductwork or 5" (125 mm)ductwork with a reducing collar.The installation procedure

Distance between cooktop and hood (S)Do not install this exhaust hood over cooktops burning solid fuel.Provided a larger distance is not given by the

The majority of the weight of theinstalled ventilation system will besupported by the lower retainingplate. It must be firmly attached tothe stud fram