Miele KM 93-2 User Manual download pdf (Page 11)

Using the cooktop

Press in the correct control knob and

turn counter-clockwise to the high

setting (large flame symbol).

When the flame ignites, keep the but-

ton pressed in for 5-10 seconds, and

then press down firmly once more

before letting go.

If the flame goes out, repeat the proce-

dure, keeping the control knob pressed

in for a few extra seconds.

If, after several attempts the gas still

does not ignite, check whether the

knobs of the burner cap are correctly

positioned in the notches of the burner

head.

Turn the control knob to:

– the high setting for boiling or

searing food or;

– the low setting for continued cooking

and for keeping food warm.

Turn the control knob to a low setting to

prevent food from boiling over or burn-

ing.

To shut the burner off, turn the con-

trol knob clockwise to the “

X“ posi-

tion.

The flame will go out.

Power outage

If there is an interruption to the electri-

cal supply, the gas can be ignited with

a match.

Press in and turn the burner control

counter-clockwise to the highest set-

ting, (large flame).

With the control knob pressed in,

ignite the gas at the burner with a

match.

Keep the control knob pressed in for

an additional 5-10 seconds, then

press down firmly once again before

letting go.

Important:

When using the burners :

Make certain that there is a minimum

distance of 2" (50 mm) between the

pan and heat-sensitive countertops

or surroundings.

After combustion, the hot gases

flow outwards under the base of the

pan, and may consequently burn

the edge of the countertop or sur-

roundings they are not heat resis-

tant.

Using the cooktop

11

1 ... 10 11 12 ... 28

Comments to this Manuals

No comments