Miele Dishwasher G 658 SCVI User Manual download pdf (Page 14)

Water softener

To achieve good cleaning results, the

dishwasher needs soft water. Hard

water results in calcium deposits on

dishware and in the dishwasher.

If your tap water hardness is above

8 gr/gal (values are in US gallons)

(140 ppm), the water should be

softened. This takes place

automatically in the unit’s integrated

water softener.

–

Your local water authority will be able

to advise you of the water hardness

level in your area.

– The dishwasher must be

programmed to correspond to the

water hardness in your area.

– The water softener must be filled with

dishwasher salt for reactivation.

If your water hardness is consistently

lower than 8 gr/gal (140 ppm), you do

not need to add dishwasher salt.

However, the dishwasher must still be

programmed to correspond to the local

water hardness.

Where the water hardness fluctuates

e.g. between 9 - 17 gr/gal (160 - 310

ppm), always program the machine to

the higher value, 17 gr/gal (310 ppm) in

this example.

If there is a fault, it will help the service

technician to know the hardness of your

local water supply.

^ Please note the water hardness:

gr/gal

Before using for the first time

14

1 ... 13 14 15 ... 56

Comments to this Manuals

No comments