Miele G 6985 SCVi Installation Manual download pdf (Page 21)

Before using for the first time

21

Water hardness

The display changes to the water hard‐

ness setting.

– The dishwasher must be program‐

med for the wat

er hardness in your

area.

– Your local water supplier can tell you

the wat

er hardness level in your area.

– Where the water hardness fluctuates

e.g. between 10 - 16 gr/gal (10 - 15

°d),

always program the dishwasher

to the higher value (16 gr/gal or 15 °d

in this example).

It is useful to know your water hardness

so that you can

provide the service

technician with this information in the

event of any service calls.

Enter the water hardness below:

____________ gr/gal (°d)

The dishwasher is programmed at the

fact

ory for a water hardness level of 1

gr/gal (1 °d).

 Use the  arr

ow buttons to select

the hardness of your water supply

and confirm with OK.

See "Settings menu - Water hardness"

for mor

e information.

The message Set-up successfully com-

pleted w

ill then appear in the display.

After confirming this message with OK,

the pr

ompts  and  Refill rinse aid

may appear.

 Add salt and rinse aid if necessary

(see "Before using for the first time -

Dishwasher salt" and "Rinse aid").

 Confirm the messages with OK.

The display will switch to the main

menu.

The prompt to set the dishwasher up

for first use will not appear agai

n after

you have run the first complete pro‐

gram.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 99 100

Comments to this Manuals

No comments