Miele G 6985 SCVi Installation Manual download pdf (Page 45)

Operation

45

Starting a program

 S

tart the program by closing the door

within four seconds of the last press

of a sensor button.

The TimeControl function indicator light

comes o

n to show that a program has

been started.

If you do not close the door within

four seconds, the message Press OK

to start will appear in the display

.

The program cannot be started until

you

confirm the message by press‐

ing the OK button and close the door

within four seconds.

If you open the door, the message

Dishes can be added will appear in the

d

isplay.

As long as this message is showing,

dishware can be added without com‐

promising wash results.

 W

ater in the dishwasher may be

hot. Danger of scalding from water in

the cabinet.

Make sure you open the door very

car

efully.

A program should only be canceled

in

the first few minutes, if at all. Oth‐

erwise important program stages

could be omitted.

Time display

The estimated duration of the program

select

ed appears in hours and minutes

in the display before the program be‐

gins. During the program, the time left

until the end of the program is dis‐

played.

Each program stage is indicated by a

symbol:



Pre-wash / Soak



Main wash



Interim rinse



Final rinse



Drying



Finish

The program duration displayed may

var

y with the same program. It is influ‐

enced by, among other things, the wa‐

ter temperature at each intake, the re‐

activation process, the type of deter‐

gent, the amount of dishware, and the

amount of soiling.

When a program is selected for the first

time, the display shows an aver

age

time for a cold water intake.

The times shown in the program over‐

view r

efer to standard test loads and

temperatures.

Each time a program is run, the elec‐

tr

onic module calculates the program

duration required according to the tem‐

perature of the water taken into the

dishwasher and the amount of dish‐

ware.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 99 100

Comments to this Manuals

No comments