Miele HG01 User Manual download pdf (Page 17)

Place the bracket on the door panel

so the notches, a, cross the previ

ously drawn centerline, and the bot

tom of the bracket lines up with the

horizontal X line.

Mark and drill pilot holes for the

screws using a 3/32" (2.5 mm) drill

bit.

Attach the bracket to the back of the

panel, using the 14 screws provided.

The top four pair of holes, only need

to be secured once per pair.

Double check the location of the

bracket before mounting the panel to

the dishwasher.

The door handle must be installed on

the panel before it is attached to the

machine. It should be located in the

center of the panel at a height that will

match the surrounding drawer handles.

Any screws used to attach the door

handle must be countersunk so that

the rear of the front panel remains

flat.

Installation

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

No comments

Miele HG01 User Manual Page 17