Miele HG01 User Manual download pdf (Page 19)

7.Adjust and secure the front

panel

Once installed, the panel can be raised

or lowered up to 1/16" (2 mm) to match

the cabinet lines.

Adjust one side of the door panel at a

time using a T20 Torx screwdriver.

Do not use a power screwdriver to

adjust or secure the decorative

panel to the dishwasher.

If the upper screws on the edge of

the door are not loose, loosen them

slightly.

The panel

can be raised or lowered

by turning the lower

screw on each

side of the dishwasher door.

To raise the panel turn clockwise.

To lower the panel turn counterclock

wise.

Once this side of the panel lines up

with the cabinets, secure it by tight

ening the upper

screw on the edge of

the dishwasher door.

Repeat the process with the other

side of the panel.

Close the door.

Check the alignment. Readjust if

needed.

Insert the supplied end caps into the

four screw holes.

Installation

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

No comments

Miele HG01 User Manual Page 19