Miele HG02 Operations Instructions download pdf (Page 11)

Before using for the first time

Before using for the first time,

please note the following points.

Setting the water softener

The water softener must be set to corre

-

spond to the water hardness in your

area. This can be obtained from your

local water company, or by using a test

kit that can be purchased from the

Miele Technical Service Department.

The salt reservoir must only be filled

with water and salt. Never fill it with de

-

tergent.

Adding rinse aid

Inadvertently filling the rinse aid reser-

voir with detergent will damage the res-

ervoir.

Only

use detergents and rinse aids for-

mulated for domestic dishwashers.

Choose the correct program

Different wash programs should be se-

lected for different loads and different

degrees of soiling. See the program

chart for further program descriptions.

Add the correct amount of detergent

Generally, 1 ½ tablespoons (25 ml) of

detergent is enough for most wash

loads. Not enough or too much deter

-

gent can lead to poor wash results.

Cleaning results vary among detergent

brands. If you are not satisfied with the

wash results, try another brand of de

-

tergent.

Load dishes correctly

Load dishes so that water can reach all

surfaces. Check that the spray arms

are not blocked by items that are too

tall for the baskets or hang through the

bottom of the baskets. If necessary,

manually rotate the spray arms to

check clearance.

The combination filter in the base of

the wash cabinet and the spray arms

must be kept clean.

These should be regularly inspected

and cleaned, if necessary.

See the corresponding sections for de

-

tailed information on the above points.

Every dishwasher is tested before

leaving the factory. Any water re

-

maining in the machine is from

these tests and does not indicate

that the machine has been used.

Before using for the first time

11

1 ... 10 11 12 ... 60

Comments to this Manuals

No comments