Miele HG02 Operations Instructions download pdf (Page 44)

Problem Possible cause Remedy

The dishwasher stops

during a program.

Not enough water is en

-

tering the machine.

The “Intake/Drain” indica

-

tor flashes.

Before searching for the

problem:

Turn off the dishwasher.

–

Open the water valve

completely.

–

Check the intake filter

and clean it if neces

-

sary, see “Cleaning the

intake filter”.

–

Check the water level

and increase the intake

time if necessary, see

“Checking the water

level”.

Drainage is restricted -

water is still inside the

dishwasher at the end of

a program. The “In-

take/Drain” indicator

flashes.

Before searching for the

problem:

Turn off the dishwasher.

– Check for kinks in the

drain hose.

– Clean the drain pump

and non-return valve,

see “Cleaning the drain

pump and non-return

valve”.

–

Clean the combination

filter, see “Cleaning the

dishwasher filters”.

The indicator lights next

to program buttons 1 to

5 flash.

A service call may be

needed.

–

Turn off the dishwasher

and restart.

If the indicators flash

again:

–

Call the Miele Techni

-

cal Service Depart

-

ment.

Problem solving guide

44

1 ... 43 44 45 ... 60

Comments to this Manuals

No comments