Miele HG02 Operations Instructions download pdf (Page 47)

Problem Possible cause Remedy

White residue is visible

on cutlery and dishes,

and clouding is evident

on glasses; the residue

can be wiped off.

Not enough rinse aid was

dispensed.

See “Adding rinse aid” to

increase the dosage.

The salt reservoir is

empty.

The “Salt - PC” indicator

is lit. See “Filling the salt

reservoir”.

The water softener is set

too low.

Change to a higher set

-

ting; see “Before using

the first time”.

The salt reservoir cap is

not screwed on properly.

Screw the cap on firmly.

Phosphate free detergent

was used.

Try a detergent contain

-

ing phosphates.

Glasses are dull and

discolored and the film

cannot be wiped off.

Glasses are not dish

-

washer safe.

This is permanent and

cannot be reversed. Use

glasses that are dish-

washer safe.

The dishes are not dry

or there is streaking on

glassware and cutlery

Not enough rinse aid was

dispensed or the rinse aid

reservoir is empty.

Increase the dosage or

add rinse aid; see

“Adding rinse aid”.

The dishes were un-

loaded too soon.

Allow dishes to cool be-

fore unloading them; see

“Unloading the dishes”.

Heated drying is turned

off.

Turn on heated drying,

see “Operating the dish

-

washer”.

There are rust stains on

cutlery.

The cutlery is not corro

-

sion resistant or the sur

-

face of the cutlery is

scratched or pitted.

There is no remedy.

Always purchase dish

-

washer safe cutlery.

The detergent dispenser

lid cannot be closed.

Detergent residue may be

blocking the latch.

Clean out the residue

.

Detergent remains in

the dispenser at the end

of a program.

The dispenser was damp

when detergent was

added.

Make sure the dispenser

is dry before adding de

-

tergent.

Problem solving guide

47

1 ... 46 47 48 ... 60

Comments to this Manuals

No comments