Miele T 510 Operations Instructions download pdf (Page 67)

,

The oven must be built into its

housing unit before it can be used.

In order to function correctly, the

oven requires an adequate supply

of cool air.

Ensure that the supply of cool air is

not impaired:

– do not fit a back panel in the

housing unit.

– the unit shelf on which

the oven sits must not

touch the wall behind it.

– do not fit insulation

to the side walls of the

housing unit.

Please also ensure that the cool air

supply is not unduly heated by other

heat sources such as a wood

burning stove.

Before installation

^ Before connecting the oven to the

mains, you must disconnect the

power supply to the oven isolator

switch.

Installing the oven

^

Connect the mains cable from the

oven to the isolator.

Lifting the oven by the door handle

can damage the door.

It is advisable to remove the door

before installing the appliance (see

"Cleaning and Care - Removing the

door") and remove accessories from

the oven cavity. This will make it easier

to install in its niche and you will not be

tempted to use the handle to carry it.

Remove the carry handles at the

sides.

^

Push the oven into the housing unit

and align it.

^

Open the door (if you have not

removed it previously).

^

Use the screws supplied to secure

the oven to the side walls of the

housing unit through the holes in the

oven trim.

^

Refit the door, if necessary (see

"Cleaning and care - Refitting the

door").

Installing the oven

67

1 ... 66 67 68 69 70 71 72

Comments to this Manuals

No comments